FRONTLINE ROLL FORMS PVT LTD

Designers, Engineers & Suppliers

Pre-engineered Buildings, Industrial Sheds , Cold Formed Sections


COLD ROLLED FORMING

Cold-formed steel structural members are shapes commonly manufactured from steel plate, sheet or strip material. The manufacturing process involves forming the material by either press-braking or cold roll-forming to achieve the desired shape. No heat is required to form the shapes (unlike hot-rolled steel), and thus the name ‘cold- formed steel’. Cold- formed steel members and other products are thinner, lighter, and easier to produce, and typically cost less than their hot-rolled steel members.We provide one stop and innovative solution for wide range of Channels , Lip Channels , Purlins & other CRF sections in Galvanized ,& HR material for various applications as per IS and international standards.We can manufacture CRF sections up to Tensile strength of 750 Mpa. Table below Shows the information about ranges and sizes of various profiles, Z PURLINS , C LIP CHAANELS , HAT SECTION etc developed by us for use in construction and Solar mounting structure.




COLD ROLLED FORMED SECTIONS

Sr.No Component Profile Image Sizes we make (mm) Common Applications
1 Light Duty Channel

H = 80 - 300 mm,

B = 25 - 60 mm,

T = 2.0 - 3.0 mm

  1. Material Handling, Storage equipment, racking, domestic appliances, portable structures
  2. In Scaffolding at site work.
2 C Purline

H = 50 - 300 mm,

B = 40, 50, 60, 70

C = 15, 20 mm,

T = 2.0, 2.5, 3.0

  1. Architectural, structural engg and buildings.
  2. Equipment frame
  3. Elevators - elevators and conveyors
3 Double lip channel

H = 40, 50, 60,

W = 80 - 300 mm,

C = 10 mm,

B = 20 mm,

T = 2.0 - 3.0 mm

  1. Portable structures, Cabins & containers, for guardrail
  2. Machine base
  3. Racks and storage systems
  4. Over head trolley tracks for assembly lines
4 Hat section

H = 45 mm,

B = 60 - 120 mm,

C = 15 - 20 mm,

T = 2.0 - 3.0 mm

  1. Truss member
  2. secondary member in PEB
  3. fencing of boundry wall
5 One side lip channel

H = 35 mm,

B = 80 - 300 mm,

c = 20 mm,

T = 2.0 - 3.0 mm

  1. Rail Bogie Coaches Section
6 U-lip channel

H = 67 mm,

B = 57 - 200 mm,

C = 18.5 mm,

T = 2.5 - 4.5 mm

  1. In high speed overhead conveyor system, In automotive assembly shop
  2. Over head trolleys
  3. Light structure
  4. Machine base
7 Heavy duty channel

H = 100 - 500 mm,

B = 75 mm,

T = 4.0 - 6.0 mm

  1. As box section for beams, columns and mobile crane booms.
  2. As I section for beams, columns , EOT Gantry Girder
  3. In foundation base frames for heavy machineries
  4. As straight chasis members for LCV's and MCV's tippers
8 Z-Purlin

H = 100 - 300 mm,

B = 40, 50, 60, 70,

C = 15 - 20 mm,

T = 2.0, 2.5, 3.0

  1. Roof framing member allows flexural continuity between spans.
  2. Steel structure construction
  3. Industrial complex
9 Pocket Carrier Mounting Plate
  1. Bottle cleaning machine part
  2. Consumer goods industry
10 Terminal Mounting Channel

H = 16 mm,

H1 = 9 mm,

B = 32 mm,

C = 10 mm,

C1 = 6 mm,

T = 1.6 mm

  1. In Electrical Installation
  2. Electrical installations